Moisture Detected S7: Solved Mositure Detected Issue In Charging Point

Moisture Detected or “Moisture has been detected” one of the most common error that user encounters while charging their phone.As compared to other smartphones, Samsung's S7, S8, S9, S10 smartphones users have complained a lot about this issue. this article we talked about What exactly this “moisture detected s7” or “moisture detected in other smartphone” issue is? how you can get moisture out of your phone charging port? What are other ways of charging your smartphone if moisture issue didn't get solve?

How to get Moisture out from Your Samsung Charging Port?
Here we listed some simple ways that you can use to rid off from “moisture detected” or “moisture has been detected” issue:

Find The Moisture Affected Component
Before we start the Moisture remove process, it's important to find out which component of your smartphone is affected by moisture.There you have to examine your phone carefully and have to look for affected areas of your smartphone.Check carefully all the component of your smartphone, whether it's sim slots, charging port, headphone jack or any other component which can get affect by exposed with water and dust.Once you find out the affected component, remove it from your smartphone and wait for it to get dry.

Use Hair Dryer
Don't blow air into the charging port as the moisture may further go inside the device and can damage your smartphone.In such case use hair dryer to wipe out moisture from your smartphone.While using hair dryer to remove moisture set it's temperature at a low or moderate level so that the device doesn't get damaged by heat.

Shake Smartphone & Use Soft Cotton
Use soft cotton cloth to wipe moisture component of your smartphone.Also shake your smartphone with the charging port facing down to remove water from USB port.

Vacuum Cleaner
You can use vacuum cleaner to suck moisture from all your smartphone components.

Use Air Compressor
Apart from vacuum cleaner, you can use air compressor to blow out water from your smartphone. Just set your air compressor to a low psi (pounds per square inch) setting.After that, blow it's air across all the surface and ports of your phone.